Dsc Pc5010 Installer Code



Is there a way to reset master code on dsc 1832 2 Answers I have a DSC 1832 security system at my home but never got the master code from the installer who I have now lost touch with. Laudate dominum meaning. I need to set the clock on my 5501 keypad and it appears that requires the master code.

Is the yellow ‘trouble’ LED lit on your alarm keypad? DSC uses LED codes to indicate trouble details for all keypads that don’t have an LCD readout display. The following applies to all PowerSeries panels, which include PC1616, PC1832, PC5010, PC5015 and others.

  • How to unlock the DSC alarm PC-5010 If you h.
  • Security System DSC Power 832 PC5010 Instruction Manual. Led keypad code changes (3 pages) Security System DSC Power 832 PC5010 Instruction Manual. When enabled a system tamper on the system must be reset by entering the installer code !8installer code before the system can be armed. If there is a system tamper present Auto-arming.

To view system troubles, press:

Sep 25, 2013 The default installer code on the Power 832 is 5010. On the rest of the units, it is 5555. To get into programming mode, press.8 and then the installer code 5010 (if that doesn't work, then 5555). The program light should flash. Hurricane one rob font free download. This installer mode is actually the highest level of access. From there, you can change everything. Unfortunately you may be out of luck unless they didn’t turn on the installer lockout. If star 8 5555 or star 8 panel model number example, 5010 or 1550 all you can do is try and set the panel back to factory default.

  1. Service Required (press [1] for more information)
    1. Low Battery (main battery in panel)
    2. Bell Circuit
    3. System Trouble
    4. System Tamper
    5. Module Supervision
    6. RF Jam Detected
    7. PC5204 Low Battery
    8. PC5204 AC Failure
  2. AC Failure
    • AC power is not present at the panel (the system is operating on stand-by battery power.
  3. Telephone Line Trouble
    • The panel does not detect an active telephone line.
  4. Failure to Communicate
    • The system attempted to communicate with the monitoring station but failed.
  5. Zone Fault (press [5] for more information)
    • The system is experiencing difficulties with one or more sensors or zones.
    • Press [5] for the keypad to display which zone is experiencing the fault.
  6. Zone Tamper (press [6] for more information)
    • The system has detected a tamper on one or more sensors on the system.
    • Press [6] for the keypad to display which zone is tampered.
  7. Device Low Battery (press [7] for more information)
    • A wireless device has a low battery.
    • Press [7] for the keypad to display which zone has a low battery.
  8. Loss of System Time
    • If complete power was lost (AC and battery), the time and date will need to be re-programmed.
    • To program the time, press
Dsc 5010 user codes

admin • 14/02/2015

Next Post ↠

Managing Users on a DSC Alarm System

Is the yellow ‘trouble’ LED lit on your alarm keypad? DSC uses LED codes to indicate trouble details for all keypads that don’t have an LCD readout display. The following applies to all PowerSeries panels, which include PC1616, PC1832, PC5010, PC5015 and others.

To view system troubles, press:

Dsc Pc5010 Battery

  1. Service Required (press [1] for more information)
    1. Low Battery (main battery in panel)
    2. Bell Circuit
    3. System Trouble
    4. System Tamper
    5. Module Supervision
    6. RF Jam Detected
    7. PC5204 Low Battery
    8. PC5204 AC Failure
  2. AC Failure
    • AC power is not present at the panel (the system is operating on stand-by battery power.
  3. Telephone Line Trouble
    • The panel does not detect an active telephone line.
  4. Failure to Communicate
    • The system attempted to communicate with the monitoring station but failed.
  5. Zone Fault (press [5] for more information)
    • The system is experiencing difficulties with one or more sensors or zones.
    • Press [5] for the keypad to display which zone is experiencing the fault.
  6. Zone Tamper (press [6] for more information)
    • The system has detected a tamper on one or more sensors on the system.
    • Press [6] for the keypad to display which zone is tampered.
  7. Device Low Battery (press [7] for more information)
    • A wireless device has a low battery.
    • Press [7] for the keypad to display which zone has a low battery.
  8. Loss of System Time
    • If complete power was lost (AC and battery), the time and date will need to be re-programmed.
    • To program the time, press

Dsc 5010 Reset Installer Code

My muvee free download. admin • 14/02/2015

Next Post ↠

Dsc Pc5010 Installation Manual

Managing Users on a DSC Alarm System